Matrix 6e 10G UTP Cabling Solutiosn

ADDISON MATRIX 6E 10G Ethernet UTP Cabling Solution

ADDISON MATRIX 6E 10G UTP Cabling System is a end-to-end ethernet solution. It combines current application and further development, in accordance with 10GBASE-T standard. It is characterized by:

10Gb/s transmission rate

High quality with low cost

Easy to install and maintain

1 . MATRIX 6E 10G UTP Ethernet

With the falling cost of the ethernet equipment, the adoption of 10G ethernet has become a trend. IEEE founded 10G BASE-T working group in 2002 to evaluate the feasiblity of 10G working on 100 meter cabling systerm. Addison lunched 10G unshielded and shielded copper cable cabling solution in 2005 which is called MATRIX 6E.

MATRIX 6E is an enhanced version of our current 6 category. It is in accordance with the latest channel requirement which is regulated by IEEE 802.3 an working group. It can offer 500MHz 10G channel performance. With special patented technology, it can increase transmission capacity to achieve 10Gb/second over 55 to 100 meter cable channel length.

In addition, MATRIX 6E is an integrated end to end solution. Every part in the system adopts advanced design for achieving superior NEXT performance. It offers good margin for good channel performance.

MATRIX 6E10G UTP SYSTEM PERFORMANCE
Addison MATRIX 6E 10G UTP ethernet Cabling Systerm is an enhanced version of Addison 6 category system, It could achieve transmission rate of 10G ethernet on a full channel length of 100 meter.

Firstly, this system adopts the basic design principle for category 6 sytem and therefore the technique is mature and the performance is well proven.

At the early stage of designing the Matrix 6E system, category 7 cables and connectivity hardwares were designed to realize 10G solutions. However, with the use o category 7 system, a new installation guidelines are required and there will be a significant training required for implementation of the 10G system. In view of this, we come to an issue of providing 10G solution with our existing Category 6 system. The answer is positive. The bandwidth of the enhanced 6 category system could now be expanded to 500MHz. Even better, our enhanced category 6 cables can provide a bandwidth of 600MHz, meeting the transmission rate of 10G.
Category 6 10G system is proved to be a mature and feasible solution. This system is acknowledged by the cabling industry and is widely adoped in the installations.
The second points of the 10G system is its high quality as compared to low cost.
It takes quite a long time to develop category 7 systerm and which involves a lot of manpower and resources to come to the present stage. Therefore, it is not surprising to come out with high cost. However, enhanced 6 category system is just an upgraded version of category 6. That is to say, they have a similar pricing as normal category 6 system.

2. MATRIX 6E 10G INSTALLATION AND MAITENANCE

It is easy to install and maintain Addison MATRIX 6E 10G UTP Ethernet cabling system.

MATRIX 6E is developed based on the existing category 6 system and therefore it follows the same installation guidelines applied for the category 6 system.Many technical issues have to be addressed for 10G system because of its high transmission capacity b